Offering Comprehensive Solutions for Your Home

Things to Know Before You Install a New Furnace In Your Home

Things to Know Before You Install a New Furnace In Your Home

A furnace is an appliance that keeps your home warm consistently through the movement of heated air, hot water or steam. Since they produce a lot of heat, an improper installation can pose danger to your home. That is why Crawfordsville and Greencastle heating contractors are required to follow strict guidelines in order to ensure a safe and running furnace and to keep homeowners away from harm.

There are many things that a contractor takes into consideration before installing your furnace. Below is a checklist of the things that should be observed by your heating contractor:

1. Load calculation – In order to know a home’s heating and cooling requirements, a contractor should understand the load calculation of the house. There are contractors who base or determine the needs for heating or cooling on the size of the house (square feet). This is an inaccurate guide by itself. A quality HVAC contractor will also take into consideration the size of the family and projected usage, as well as the average climate and many other factors.

2. Ventilation – Venting systems should always be compliant to furnace installation requirements and regulations. Your old venting system can still be used as long as it is compatible with the new furnace you had installed by your contractor. However, for blower-type furnaces, it is required to have at least two square inches for every 1000 BTU. Your best option is to find a contractor familiar with ductwork installation.

3. Garage furnaces – An elevation height of at least 18 inches from the floor of the garage to the point of ignition must be observed. At the same time, the furnace should be kept away from the path leading to the garage area.

Request Service or Quote

Fill out the form below to request in-home estimate for service or new installation.

Fields with (*) are required.
Full Name*
Phone Number*
Email Address*
Comments

4. Restricted areas – Bedrooms, closets and bathrooms cannot be outfitted with gas-fired furnaces. Furnace installation in the attic requires a five feet space from the floor to the ceiling with a 30”x30” opening within 20 feet of the furnace’s location.

5. Underfoot furnaces – Underfoot furnaces should have a light switch near it in order have visibility during operation. Suspended furnaces, on the other hand, must be elevate at a 6 inch height above the ground.

6. Inspection – After the furnace installation, your contractor should provide a description of the installation for the building inspector to check. Chimneys are inspected to verify the compliance to the standard 350 degrees.

Hiring a certified Crawfordsville or Greencastle heating contractor for your furnace installation needs can be easy if you do your due diligence and know what to expect. It is very important to hire furnace installation contractors that offer a warranty on their work, especially if you have a nicer furnace. A lot of furnaces have a five year warranty on parts and a lifetime warranty on the heat exchangers. With this information, you can be more prepared when looking up furnace repair professionals in Crawfordsville or Greencastle.

If you need routing heating repair services in Greencastle and Crawfordsville, call Cook Home Services at 765-232-0108, or fill out our online request form.